V-Paint is a ceramic coating for paint with a durability of up to 2 years, developed with silicon molecules that coat the vehicle surface and form a highly resistant nanotechnology barrier. V-Paint promotes water repellency, UV protection, and deep shine. The nanofilm formed on the paint minimizes the harmful effects of tree sap, bird droppings, sunlight, sea air, acid rain, and even micro-scratches caused by improper washing, preventing premature paint wear.
Dilution:
Ready to use .
Recommended use:
Paint and wheels.
Durability:
Up to 2 years.
Curing time:
Partial: 12 hours,
Total: 6 hours.
Additional information:
All instructions on the product label and box must be followed rigorously to guarantee excellence and high durability. Keep the packaging always closed to prevent the product from solidifying.
V-Paint can be used on alloy wheels.
Yield: 1 vehicle.
We do not recommend applying V-Paint to leather and plastic.
Usage and maintenance tips:
- Always wash the vehicle in the shade using V-Floc and a microfiber glove.
- Use Sio2-Pro every 30 or 45 days to help maintain shine, leave the paint with a velvety touch and increase its lifespan.
- Do not use acidic, basic or solvent-based products.
- Perform the first wash only 6 days after applying the product.
- In case of exposure to rain before complete curing, it is recommended to dry the vehicle with a drying towel
- It is not recommended to use cleaning waxes on the vitrified layer, as the abrasives contained in these waxes may remove the coating.
- If the vehicle is washed with well water, it is necessary to dry it well to avoid possible stains caused by calcium and magnesium salts contained in this water, and then apply Sio2-Pro.
- In case of nozzle clogging, it is recommended to reopen the orifice with a paperclip or needle. Wash the applicator immediately after use to prevent solidification.
Precautions:
Caution! Dangerous if swallowed. Avoid prolonged contact with skin. Wash hands after use. Keep out of reach of children and pets.
- Protection for up to 2 years
- SiO2-based product.
How to use:
1. Ensure the paint is in perfect condition and free of scratches.
2. Apply the product using the applicator included in the packaging, wrapped in suede microfiber. Begin application with crisscrossing movements in an area no larger than 80cm x 80cm, until the area is completely covered.
3. Finish by using a clean, dry microfiber towel until the desired shine is achieved. Finish with an ultra-fine finishing cloth.
4. Repeat the procedure until the entire vehicle is complete. In case of stains, we recommend reapplying the product to the stained area and removing it within 1 minute.
Recommendations
- Spray a good amount of Revelax onto the applicator and microfiber cloth to dissolve the product.
- Place a few drops of Microlav onto the applicator and microfiber cloth . - Rub
well
- Rinse afterwards.
- Dry in the shade.
